Digi-Star EZ 320 - Manual (Page 4)

MODEL 320 - System Operation:
2
Using the Help Key: NOTE: The scale is in GROSS mode if there is
The [HELP] key provides additional infor- text above the [NET/GROSS] key.
mation about the weighing modes, set-
up/calibration, and recipe programming.
Step 1) Pressing [HELP] while displaying
weight will display information about the last
NET mode displays the weight change after a
key pressed. TARE has been performed. TARE is a
To Select Gross Mode:
GROSS mode displays the weight change
since the unit was last ZERO/BALANCED.
Step 1) Press [NET/GROSS].
Press the [NET/GROSS] key if in the NET or just above the [TARE] key.
LOAD/UNLOAD mode.
a flashing arrow pointing toward the GROSS
To Select Net Mode:
temporary "zero" point.
Step 1) If the scale "TARE" weight has not
been entered, press [TARE] to acquire a
"zero".
or
Step 2) If in Gross mode, press
[NET/GROSS]. The [NET/GROSS] key is an
alternating action key. If the scale is in the
GROSS mode, pressing the [NET/GROSS]
key places it in the NET mode. If the scale is
in the NET mode, pressing the [NET/GROSS]
key places it in the GROSS mode. If in
LOAD-UNLOAD mode, press [NET/GROSS]
two (2) times.
If the "TARE" function has not been
previously performed, the unit will stay in the
GROSS mode and the message "FOR NET
MODE PRESS TARE" scrolls across the
display.
NOTE: The scale is in NET mode if there is a
flashing arrow pointing toward the NET text