Digi-Star TMR Tracker User Manual - Manual (Page 12)

D3601 Rev. E
12
Select the feeding you want to send by clicking on the feeding number. This will display the pens
and call weights to be fed for that feeding. You can adjust the order to be fed by highlighting a pen and
clicking the up or down arrow to move the pen up or down in the order. Click Save Feeding Order to save
the order. When done, click Send Feedings. This will send the pen feedings to the Datakey.
You print a feed / load sheet by clicking on the Print List under Print Load Sheet.
Step 8
Please follow the operating instructions for the EZ3500/EZ4300 to load and feed.
Step 9
Receive Data. Click on the Receive Data icon.
This will display the Obtain Data from Memory Device screen:
The Truck number will be read from the DataKey. Click OK. The following screen will be displayed: