Digi-Star TMR Tracker User Manual User Manual
Page 13
D3601 Rev. E
13
As the data is read from the DataKey, a green progress bar will display the read status. When the transfer is
complete, the Cancel button will change to Done. Click on Done. The following screen will be displayed:
The DataKey should be cleared whenever the data is read into the TMR Tracker program.
Datakey Docking Station Activity Light Formats
This shows how the activity light would
behave: (Green) On, (Blank) Off
Step 10
Report Center. To run reports, click on the Report icon.
The Report Center screen will be displayed.
Report options are displayed when the report is selected. Options include selection of specific rations,
pens, user’s and tolerance settings. You may use these settings to customize a report for your specific
needs. Once this report has been created, you can save this report under the User Defined Reports, please
refer to the manual for detailed explanations of each report.