Digi-Star TMR Tracker User Manual - Manual (Page 3)

D3601 Rev. E
3
To register the software, call Digi-Star, Monday through Friday between the hours of 8 AM and 5 PM
Central time. You will need to provide us with the installation CD serial number and dairy contact
information. When you click on YES, the following screen will be displayed:
After you have successfully registered the TMR Tracker program, the software will start at the main screen.
An explanation of the program icons follows:
1 Ingredients 10 View Data on Datakey 19 Help
2 Rations 11 Erase Datakey
3 Pen Types 12 Milk Weights
4 Pens 13 Milk Price
5 Pen Grid 14 Feed Refusal
6 Mixers 15 Reports
7 Operators 16 Backup Scheduler
8 Send Data 17 Receive email
9 Receive Data 18 Send email
To begin using the TMR Tracker software, you must enter your data. Data is entered in the order shown by
the icons.
If TMR Tracker is used with RF Datalink, go to the System dropdown menu, Default Settings, Data
Transfer tab, then select RF Datalink.
Your Send and Receive icons will appear.