Flowserve PMV D3 Digital Positioner - Manual (Page 28)

28
FULL MENU
TUNING
Close time Minimum time from fully open to closed.
Open time Minimum time from closed to fully open.
Deadband Setting deadband. Min. 0.2%.
Expert Advanced settings.
Togglestep Test tool for checking functions. Overlays a square wave on the
set value.
K, Ti, Td Setting K, Ti, and Td parameters.
Self test Test of processor, potentiometer, etc.
Leakage Air leakage detected can be either connections, positioner
tubing or actuator.
Undo You can read last 20 changes.
The menu contents are shown in the chart on the next page and the various texts are
described below: