Disassembling pmv d3 ex – Flowserve PMV D3 Digital Positioner User Manual
Page 44
Advertising
44
Disassembling PMV D3 Ex
• Loosen the screws A and B and remove
the caps C och D.
• Remove the inner display cover E by
loosening the four screws F.
• Carefully remove the display board and
loosen the connections H and I.
• Release the wide cable from the connector
J on the terminal board.
• Loosen the three screws K.
• Remove the circuit board package L, con-
sisting of terminal and processor board.
• Remove he four screws M and lift the block
N.
A D
F
E
G
B C
H
I
J
L
M
N
K
Advertising