Flowserve PMV D3 Digital Positioner - Manual (Page 39)

Valve block
Tur n off the air and electr ic power
supply before star ting any wor k.
• R elease the connector F from the proces-
sor pcb.
¥ R emove the four screws I.
¥ L ift out the valve block
N.B . Do not disassemble the valve block
¥ When installing the valve block Ñ torque
the four screws to 1,4 Nm and sealwith
L ocktite 222.
Silencer
A silencer, L (option) can be mounted under
the plate M on the D3. Contact PMV .
Spindle adapter
T he spindle adapter can be changed to suit
the actuator in question, see page 9.
I
F
M L