Flowserve MX HART Field Unit User Manual
Page 41
Advertising
41
MX/QX HART Field Unit FCD LMENIM2340-00 – 1/14
flowserve.com
Enter the target position you wish the actuator to move to (it will return to the start position after it reaches the target posi-
tion). The current start position is displayed as “Actuator Measured Position”
The following will be displayed while the PST is in progress:
Once the test completes, the test results will be displayed. The following figure shows a passing test.
Advertising
This manual is related to the following products: