Basic settings – Flowserve URB 1 User Manual
Page 48
Advertising
48
Press button twice briefly to select the
digit “3”.
Press button five times briefly.
In our example a conductivity setpoint of
3000 µS/cm has been adjusted.
Press button once briefly to move the
cursor one step further.
Press button once briefly to enter the line where
the M
IN
conductivity limit of the LRR 1-40 can be
adjusted.
The M
IN
switchpoint of the LRR 1-40 can be
adjusted in the same way as the conductivity
setpoint.
Basic Settings
– continued –
Adjusting conductivity controller
– continued –
flashing
flashing
once briefly
twice briefly
5 times briefly
once briefly
Advertising