Basic settings – Flowserve URB 1 User Manual
Page 52
Advertising
52
Basic Settings
– continued –
Adjusting conductivity controller
– continued –
flashing
Press button once briefly.
In this line you can establish the 0 %
value of the feedback potentiometer of the
continuous blowdown valve.
Press button once briefly to activate the
line editing mode.
Press button once briefly.
The value 008 = 8 % operating position is
now selected.
Press and hold down button until the continuous
blowdown valve is closed.
once briefly
once briefly
once briefly
hold down
flashing
Advertising