Basic settings – Flowserve URB 1 User Manual
Page 50
Advertising
50
Press button twice briefly to select the
digit “2”.
Press button twice briefly.
In our example the proportional band X
p
was set to 20 %.
Press button once briefly to move the
cursor one step further.
Press button once briefly to enter the line where
the control hysteresis of the LRR 1-40 can be
adjusted.
The hysteresis can be adjusted within a range of
0 % – 25 %.
The control hysteresis of the LRR 1-40 can be
adjusted the same way as the proportional
band X
p
.
If X
p
> 0 this function is deactivated.
Basic Settings
– continued –
Adjusting conductivity controller
– continued –
flashing
flashing
once briefly
twice briefly
twice briefly
once briefly
Advertising