Basic settings, Adjusting conductivity controller – Flowserve URB 1 User Manual
Page 53
Advertising
53
Basic Settings
– continued –
Adjusting conductivity controller
– continued –
Press button once briefly to activate the
100 % adjustment position.
Press button once briefly to activate the
line editing mode.
Press button once briefly.
The current resistance value of the
feedback potentiometer is saved as
0 % position (valve CLOSED).
Press and hold down button until the
continuous blowdown valve is completely open.
blinkt
blinkt
once briefly
once briefly
once briefly
hold down
flashing
flashing
flashing
Advertising