Jetway Computer J7F2 - Manual (Page 40)

36
3-10 PC Health Status
This section shows the Status of you CPU, Fan, Warning for overall system status. This is
only available if there is Hardware Monitor onboard.
Phoenix – AwardBIOS CMOS Setup Utility
PC Health Status
Item Help Shutdown Temperature Disabled
Current Thermal-Throttling Disabled
Current Thermal-Throttling Temp 70
Current Thermal-Throttling Duty 50.00%
Current Thermal-Throttling Beep Enabled
Show PC Healthy in Post Enabled
Vcore 1.07V
VDIMM 1.90V
+3.3V 3.26V
+5V 5.00V
+12V 11.96V
3VSB 3.33V
VBat 3.28V
5VSB 4.91V
CPU Temperature 48/118F
System Temperature 35/95F
CPUFAN 6849RPM
SFAN1 0RPM
SFAN2 0RPM
Menu Level >
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
Phoenix – AwardBIOS CMOS Setup Utility
Miscellaneous Control
Item Help
Auto Detect PCI Clock Enabled
Spread Spectrum Disabled
** Current Host Clock 100MHZ
Host Clock at Next Boot 100MHZ
** Current DRAM CLOCK 266MHz **
DRAM Clock at Next Boot 266MHz(By SPD)
VDIMM Select 1.90V(Default)
VAGP Select 1.55V(Default)
Flash Part Write Protect Disabled
Menu Level >
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults