Motorola DP 2600 - Manual (Page 41)

Making and R
eceiving Calls
English
31
Making a Phone Call with the One Touch Access
Button
Procedure:
1 Press the programmed One Touch Access button to make
a Phone Call to the predefined alias or ID.
If the entry for the One Touch Access button is empty, a
negative indicator tone sounds.
2 The LED lights up solid green. The Phone Call icon appears
in the top right corner. The first text line shows the
subscriber alias. The second text line displays the call
status.
3 If successful:
You hear the dialing tone of the telephone user. The first text
line shows the subscriber alias. The Phone Call icon
remains in the top right corner.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
4 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
5 Press the PTT button to talk and release to listen.
6 Press
d
to end the call.
OR
Press One Touch Access button. If the entry for the One
Touch Access button is empty, a negative indicator tone
sounds.
7 The display shows Ending Phone Call.
8 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps 6
and 7 or wait for the telephone user to end the call.
When the telephone user ends the call, a tone sounds and the
display shows Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on,
prior to initiating the call.
During channel access, press
d
to dismiss the call attempt
and a tone sounds.
During the call, when you press the One Touch Access button
with the deaccess code preconfigured your radio attempts to
end the call.
The access or deaccess code cannot be more than 10
characters.

LKP_EMEA.book Page 31 Wednesday, July 18, 2012 10:36 PM