Motorola DP 2600 - Manual (Page 86)

English
76
Controlling the Display Backlight
You can enable or disable the radio’s display backlight as
needed. The setting also affects the Menu Navigation Buttons.
Procedure:
Press the programmed Backlight Auto button to toggle the
backlight settings.
OR
Follow the procedure below.
1 c
to access the menu.
2 <
or
>
to Utilities and press
e
to select.
3 <
or
>
to Radio Settings and press
e
to select.
4 <
or
>
to Backlight Auto.
5 Press
e
to enable backlight. The display shows 9 beside
Enabled.
OR
Press
e
to disable backlight. The 9 disappears from
beside Enabled.
The display backlight are automatically turned off if the LED
indicator is disabled (see Turning the LED Indicator On or Off
on page 78).
NOTE: At Step 4, you can also use
<
or
>
to change the
selected option.
Setting the Squelch Level
You can adjust your radio's squelch level to filter out unwanted
calls with low signal strength or channels that have a higher
than normal background noise.
Settings: Normal is the default. Tight filters out (unwanted)
calls and/or background noise. However, calls from remote
locations may also be filtered out.
Procedure:
Press the programmed Squelch button to toggle squelch level
between normal and tight.
OR
Follow the procedure below.
1 c
to access the menu.
2 <
or
>
to Utilities and press
e
to select.
3 <
or
>
to Radio Settings and press
e
to select.
4 <
or
>
to Squelch and press
e
to select.
5 The display shows Tight and Normal.
<
or
>
to the
required setting and press
e
to enable. 9 appears besides
selected setting.
6 Screen returns to the previous menu.
 
LKP_EMEA.book Page 76 Wednesday, July 18, 2012 10:36 PM