Motorola DP 2600 - Manual (Page 76)

English
66
NOTE: At Step 5, you can also use
<
or
>
to change the
selected option.
Starting a Manual Site Search
Procedure:
Press the programmed Manual Site Roam button and proceed
to Step 6.
OR
Follow the procedure below.
1 c
to access the menu.
2 <
or
>
to Utilities and press
c
to select.
3 <
or
>
to Radio Settings and press
c
to select.
4 <
or
>
to Site Roaming and press
c
to select.
5 <
or
>
to Active Search and press
c
to select.
6 A tone sounds and the display shows Finding Site.
The LED blinks green.
7 If a new site is found, a tone sounds and the LED turns off.
The display shows Site <Alias> Found.
OR
If there is no available site within range, a tone sounds and
the LED turns off. The display shows Out of Range.
OR
If a new site is within range, but the radio is unable to
connect to it, a tone sounds and the LED turns off. The
display shows Channel Busy.
8 The radio returns to the Home screen.
Security
You can enable or disable any radio in the system. For example,
you might want to disable a stolen radio, to prevent the thief
from using it, and enable that radio, when it is recovered.
NOTE: Performing Radio Disable and Enable is limited to
radios with these functions enabled. Check with your
dealer or system administrator for more information.
Radio Disable
Procedure:
Use the programmed Radio Disable button.
1 Press the programmed Radio Disable button.


LKP_EMEA.book Page 66 Wednesday, July 18, 2012 10:36 PM