Motorola DP 2600 - Manual (Page 42)

Making and Receiving Calls
English
32
Making a Phone Call with the Programmable
Phone Button
Procedure:
1 Press the programmed Phone button to enter into the
Phone Entry list.
2 <
or
>
to the required subscriber alias or ID, and
press
e
to select.
3 The LED lights up solid green. The Phone Call icon appears
in the top right corner. The first text line shows the
subscriber alias. The second text line displays the call
status.
4 If successful:
You hear the dialing tone of the telephone user. The first text
line shows the subscriber alias. The Phone Call icon
remains in the top right corner.
OR
If unsuccessful:
A tone sounds and the display shows Phone Call Failed.
Your radio returns to the Access Code input screen.
If the access code was preconfigured in the Contacts list,
the radio returns to the screen you were on prior to initiating
the call.
5 Hold the radio vertically 1 to 2 inches (2.5 to 5.0 cm) from
your mouth.
6 Press the PTT button to talk and release to listen.
7 Press
d
to end the call.
OR
Press One Touch Access button. If the entry for the One
Touch Access button is empty, a negative indicator tone
sounds.
8 The display shows Ending Phone Call.
9 If successful:
A tone sounds and the display shows Call Ended.
OR
If unsuccessful:
Your radio returns to the Phone Call screen. Repeat Steps 6
and 7 or wait for the telephone user to end the call.
When you press PTT button while in the Phone Contacts
screen, a tone sounds and the display shows
Press OK to Place Call.
When the telephone user ends the call, a tone sounds and the
display shows Call Ended.
If the call ends while you are entering the extra digits requested
by the Phone Call, your radio returns to the screen you were on
prior to initiating the call.

LKP_EMEA.book Page 32 Wednesday, July 18, 2012 10:36 PM