Denso BHT-7000 - Manual (Page 129)

113
Chapter 4. Error Messages
UPLOAD FILE
File error!!
Upload?
1:Yes 2:No
UPLOAD FILE
XXXXXXXX.XXX
Communication error!!
Retry?
1:Yes 2:No
UPLOAD
Out of memory!!
UPLOAD
Too many files!!
During uploading of a program file, data
file, BHT system parameter file, or sys-
tem message file
■ Problem
The file you attempted to upload is damaged.
■ Solution
To upload the damaged file as is, press the 1 key.
■ Problem
The memory is insufficient for setting up the BHT
system parameter file or system message file to
be uploaded.
■ Solution
Press the C key to return to the SYSTEM MENU
and delete unnecessary files. (Refer to Chapter 2,
Subsection 2.6.3, [ 7 ].)
■ Problem
The memory has already contained 80 files, so the
BHT system parameter file or system message file
cannot be set up.
■ Solution
Press the C key to return to the SYSTEM MENU
and delete unnecessary files. (Refer to Chapter 2,
Subsection 2.6.3, [ 7 ].)
■ Problem
Uploading has failed.
■ Solution
To retry uploading, press the 1 key.
To return to the SYSTEM MENU, press the 2 key.
Check the interface port and communications pa-
rameters in the SET SYSTEM menu or perform the
communications test in the TEST menu. (Refer to
Chapter 2, Subsection 2.6.3, [4.5] and [5.7].)
It is also necessary to check the communications
parameters setup of the host computer.