Denso BHT-7000 - Manual (Page 69)

53
Chapter 2. Getting Started the BHT-7000 and System Mode
Selecting the "5: COMMUNICATION" on the SET
SYSTEM menu calls up the screen shown at left.
1 OPTICAL: Switches to the communi-
cations parameters setting
screen
for the optical inter-
face .
2 CONNECTOR: Switches to the communi-
cations parameters setting
screen
for the direct-con-
nect interface.
3 COM PORT: Switches to the interface
port setting screen.
4 PROTOCOL TYPE: Switches to the communi-
cations protocol type set-
ting screen.
Select a desired screen by using the numerical
keys or
* and * keys, and then press the ENT
key.
To return to the SET SYSTEM menu, press the C
key.
[4.5-1] Setting the communications parameters for the optical interface
Selecting "1:OPTICAL" on the SET COMMUNICA-
TION menu calls up the screen shown at left.
1 PARAMETER: Switches to the commu-
nications parameters set-
ting screen.
2 PROTOCOL: Switches to the commu-
nications protocol option
screen.
Select a desired screen by using the numerical
keys or
* and * keys, and then press the
ENT key.
To return to the SET COMMUNICATION menu,
press the C key.
SET COMMUNICATION
1:OPTICAL
2:CONNECTOR
3:COM PORT
4:PROTOCOL TYPE
SET OPTICAL
1:PARAMETER
2:PROTOCOL
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of , ,
, and keys, respectively