Denso BHT-7000 - Manual (Page 60)

44
[ 3 ] Uploading
Selecting "3: UPLOAD" on the SYSTEM MENU calls
up the screen shown at left.
1 ONE FILE : Uploads a user program file
or data file stored in the
memory.
2 ALL FILES : Uploads all user program
files (object programs) and
all data files stored in the
memory.
3 HT<-->HT COPY : Uploads all of the files, sys-
tem parameters, and calen-
dar clock data stored in the
BHT-7000, to another BHT-
7000.
This function enables copy-
ing between the BHT-7000s.
At the receiving BHT-7000,
select "2: DOWNLOAD" and
"2: HT<-->HT COPY" in Sys-
tem Mode.
For the preparation to be
made preceding the start of
this function, refer to NOTE
given on page 40.
Select a desired item by using the numerical keys
or
* and * keys, and the selected item be-
comes highlighted. Then press the ENT key.
To return to the SYSTEM MENU, press the C key.
⇓
UPLOAD
1:ONE FILE
2:ALL FILES
3:HT<-->HT COPY
UPLOAD FILE
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
SAMPLE05.PD3
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of , ,
, and keys, respectively
If you select "1:ONE FILE" on the UPLOAD menu,
the file selection screen as shown at left will ap-
pear, listing all of the program files and data files
stored in the memory. Select a file(s) you want to
upload and press the ENT key.
If you select "2:ALL FILES" or "3:HT<-->HT COPY"
on the UPLOAD menu, the "ALL" or "HT<-->HT" will
appear in the center of the 2nd line, respectively.