Denso BHT-7000 - Manual (Page 53)

37
Chapter 2. Getting Started the BHT-7000 and System Mode
2.6.2 Operating in System Mode
Some functions in System Mode require several screens to be shifted, as shown in the
example below.
[ 1 ] Calling up the desired set screen
First, select a desired item on the current screen by using the numerical key or the
cursor keys (
* and *) so as to highlight the desired item.
Press the ENT key to establish the selected item and proceed to the subsequent
screen.
To return to the preceding screen, press the C key.
Press 5 or use
* and * to
select "COMMUNICA-
TION."
Press 4 or use
* and * to
select "SET SYSTEM."
ENT
C
ENT
C
* For BHT-7000s having a 26-key pad, use F5 , F6 , F7 and F8 keys instead of , ,
, and keys, respectively
SET SYSTEM
1:EXECUTE PROGRAM
2:DISPLAY
3:DATE/TIME
4:BARCODE
5:COMMUNICATION
6:KEY
7:RESUME
SET COMMUNICATION
1:OPTICAL
2:CONNECTOR
3:COM PORT
4:PROTOCOL TYPE
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
ENT
Press 3 or use
* and * to
select "COM PORT."
C
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION