Denso BHT-7000 - Manual (Page 4)

ii
How this book is organized
This manual is made up of five chapters and appendices.
Chapter 1. Quick Guide
Describes the basic operating method of the BHT-7000 and the related notes.
Chapter 2. Getting Started the BHT-7000 and System Mode
Summarizes the BHT-7000 system configuration and describes the operation including
preparation and System Mode (which is required for the efficient use of application
programs).
Chapter 3. Communications Operations of BHT-7000
Describes the communications operations of the BHT-7000--the RS-232C interface
specifications, the basic communications specifications, and the communications
protocols--for data transmission with the host computer or other devices.
Chapter 4. Error Messages
Lists the error messages which will appear on the LCD if some error occurs in the BHT-
7000.
Chapter 5. Handling the CU-7000 (Option)
Describes the handling procedure of the CU-7000, the interfacing with the host compu-
ter, and the charging of the battery cartridge.
Appendix A: Specifications
Appendix B: Communications Protocol Details
Appendix C: A Typical Basic Operation