2 setting-up 2: setting the calendar clock – Denso BHT-7000 User Manual
Page 38
22
(1)
While holding down the SF and 1 keys,
press the PW key to start System Mode. The
SYSTEM MENU shown at left will appear.
(2)
Press the 4 key to select the "SET SYSTEM"
on the SYSTEM MENU and then press the
ENT key, and the screen shown at left will
appear.
(To return to the immediately preceding
screen during this setting procedure, press
the C key.)
2.4.2 Setting-up 2: Setting the Calendar Clock
Power on the BHT-7000 by pressing the PW key.
The following message will appear.
In the following cases, the above message will appear. In such instances, it is
necessary to set the date and time.
•
The BHT-7000 is first powered on from the time of purchase.
• The BHT-7000 is powered on after the memory back up power source is
completely discharged.
Set the current
date and time.
00/01/01 00:00
_ / / :
It is recommended that you upload font files beforehand for such cases that you
would mistakenly delete font files or a memory storage error would cause font files
to be erased.
NOTE
SYSTEM MENU
1:EXECUTE PROGRAM
2:DOWNLOAD
3:UPLOAD
4:SET SYSTEM
5:TEST
6:VERSION
SET SYSTEM
1:EXECUTE PROGRAM
2:DISPLAY
3:DATE/TIME
4:BARCODE
5:COMMUNICATION
6:KEY
7:RESUME