MBM Corporation CORNER STAPLER - Manual (Page 12)

5.2 Trouble symptoms and corrective action
・Paper jam: → The machine stops and the Paper Jam
lamp on the collator operation panel
flashes.
Open the main cover, remove aligning to
the left guide and remove paper from the
side of the machine.
・Staple cartridge
empty or staple
jam:
→ The machine stops and the Error
(L) lamp on the operation panel
flashes. See the instruction in 5.5
“Staple cartridge replacement.”
・Paper feed
trouble on the
collator side:
→ Should collator side paper feed
trouble occur, the paper is ejected
to the stacker without stapling or
punching.
・Machine stops
owing to paper
jam or no feed
→ Should the machine stop owing to
paper jam or no feed, the last set
will have pages missing. Add
such pages to the stations.
・Machine stops
owing to double
feed
→ If the machine stops owing to
double feed, the last set includes
double pages. Remove duplicate
pages from the last set.
5.3 Disposing of punch scraps
Punch scraps accumulate in the dust case. Remove the
case by pulling it to the front and dispose of the scraps.
Caution!
When collation is performed around 300 times, the
dust case becomes full of punch scraps. Then, be
sure to dispose of punch scraps. If collation is
continued otherwise, it will cause paper jam. Also,
be sure to remove scraps when starting to collate.
11