MBM Corporation CORNER STAPLER - Manual (Page 9)

4. Preparations before Use
4.1 Installation
(1) Set the shift lever at Connection.
Connection
Independent
(2) Secure the hooks (one each at right and left
sides) of the stapler-puncher to the collator hook
pins. When removing them, do so while pulling
out the hook lever (one each at right and left
sides) of the stapler-puncher.
(3) Insert the connecting plug of the
stapler-puncher into the collator’s connector
and fasten them firmly with two screws.
Caution!
Be sure to insert the connector in the proper
direction.
(4) Insert the stapler-puncher power plug into the
collator optional power outlet.
8