MBM Corporation CORNER STAPLER - Manual (Page 15)

5.6 Punching
Each time the MODE key and PUNCH/2 key on the collator operation panel are pressed, punching mode
will switch on and off.
Punching mode On: PUNCH/2 lamp lit.
Punching mode Off: PUNCH/2 lamp not lit.
5.7 Staple jam
(1) Turn off the collator power switch and pull the
power plug from the outlet (be sure to do so to
avoid an accident).
(2) Open the main cover of the stapler punch, and pull out
the staple cartridge to the direction indicated with an
arrow in by holding the plastic portion of the staple
cartridge.
Caution!
If staples or part of a sheet remains in the clincher,
remove it using radio pliers, etc.
(3) Hit Empty Stapling.
(4) Resume the procedure referring to 5.5. “Staple
cartridge replacement (4).”
14