MBM Corporation CORNER STAPLER - Manual (Page 6)

1. Precautions before Installation and Use
1.1 Place for installation
This machine is also designed for IT power systems.
(1) Install the machine on a stable and level place.
(2) Use the Stapler-Puncher table designed for this machine.
(3) Avoid installing the machine in the following places for
safety’s sake and to avoid mechanical problems.
- Locations exposed to direct sunlight.
- Humid and/or dusty places
- Places exposed to wind, or near heat sources
1.2 Transport precaution
Handle with care so that the machine will not suffer shock or vibration.
1.3 Confirmation of contents and attachments
After unpacking the collator, check the attachments.
Should any part be missing, contact your dealer immediately.
Attachment Qty Figure
Staple cartridge 1
5