Introduction, 1 operational safety – MBM Corporation DocuVac User Manual
Page 4
Air Feed Collator Model 100, Stacker Model 101, Model 101 HCS Operator Manual
T10127
November 2001
1. Introduction
1.1 Operational safety
Always connect the equipment to a
properly grounded power source recep-
tacle. In doubt, have the receptacle
checked by a qualified electrician.
WARNING: Improper connection of the
equipment grounding conductor can
result in electrical shock.
Always follow all warnings marked on,
or supplied with, the equipment.
Always locate the equipment on a
solid support surface with adequate
strength for the weight of the machine.
Always exercise care in moving or
relocating the equipment.
Always keep magnets and all devices
with strong magnetic field away from
the machine.
Never use a ground adapter plug to
connect the equipment to a power
source receptacle that lacks a ground
connection terminal.
Never attempt any maintenance func-
tion that is not specifically described in
this documentation.
Never remove the covers or guards
that are fastened with screws.
Never install the unit near a radiator or
any other heat source.
Never override or “cheat” electrical or
mechanical interlock devices.
Never operate the equipment if you
notice unusual noises or odours. Dis-
connect the power cord from the power
source receptacle and call your cus-
tomer service engineer to correct the
problem.
Attention to the following notes ensures the continued safe operation of your
equipment.
1-1