MBM Corporation TRIUMPH 5560 - Manual (Page 28)

- 28 -
IDEAL 5560
A B
C
E
D
E
D
T
09.50
B
T
09.50
A
• Blade and cutting stick replacement •
... and tighten with screws (B) in upper
position.
Blade must be in the upper position.
Mount the blade with the blade changing
tool (A) ...
Take the exchange blade carefully out of the
blade box and screw it to the blade changing
tool (D).
• Check, if when using the upper threads (B),
the blade (E) is protected.
• The blade is not protected Use the lower
thread (C) for fixing. The screws (A) may
not exceed at the rear side of the blade.
Danger!
Blade (E) must be protected.