MBM Corporation TRIUMPH 5560 - Manual (Page 34)

- 34 -
IDEAL 5560
T 09.50
B
A
• Maintenance and cleaning •
Maintenance work may only be performed
by trained staff.
Danger!
Disconnect the mains before starting
any service work or before removing the
cover.
Grease and oil the machine according to
the lubrication diagram after 1000 operating
hours or once a year. If the machine is
subject to excessive load then twice a year.
The hydraulic oil must be changed every
2000 operating hours or every 2 years.
Type of oil:
Aral Vitam DE 46 to DIN 51562. Volume:
approximately 7 litres.
(A) Drain screw
(B) Oil stick
• Check that the hydraulic pump and
screws are not leaking. If necessary
tighten the retaining nut.
• Check pressure. Maximum pressure is
150 bar.