MBM Corporation TRIUMPH 5222 DIGICUT - Manual (Page 24)

- 24 -
5222 DIGICUT
IDEAL 5222 DIGICUT
• Operation •
Programming of multiple cut dimension
•
p Press "
X
" appears on the display.
•
0 1 ... 9 9 Enter program number 01 ... 99.
Top number on display = program number.
Lower number = program step.
• Enter the cut size on the display S .
•
g Store the dimension.
•
Enter multiple cut size.
Press T button E Y and multiple cut size
appears on the display.
Press T button again F ..... N
•
g Store the dimension.
•
p + s Escape the program mode.
Maximum nine multiple cuts can be entered.
Cancel a program
•
p press "
X
" appears on the display.
•
0 1 ... 9 9 Enter program number 01 ... 99.
•
Press button c twice.
Each program has to be cancelled separately.
Deleting a dimension when programming
Press s and overwrite the dimension.
Choose a program step appears.
Press p , hold, and press T
ß
Y lights.
Enter the desired number of steps (e.g. 0 5 ).
Change a step
b
next step
j
previous step
Insert a step
Press p , hold, and press
b
A new program
step is inserted before the displayed program step
is shown.
Delete a step
Press p , hold, and press
j
Program step
is deleted.
The following number of steps are updated.