MBM Corporation TRIUMPH 5222 DIGICUT - Manual (Page 25)

-25 -
5222 DIGICUT
Working with programs
• Press p "
X
" appears on the display
• 01 ... 99 Enter program number 01 ... 99
With the button
j
and
b
you are able to
change between several program steps.
With S the backgauge moves to the indicated
dimension.
With s the backgauge stops.
General
LED "S" lights Cut is blocked.
LED "S" is off the actual dimension appears.
In the program mode the ejection of paper
j
is not possible. The ejection of paper has to
be programmed.
Escape the program mode
•
Press p "
X
" appears on the display.
•
Press s escape the program mode.
• Operation •