MMD Equipment 40S-8B1 - Manual (Page 28)

4. Operation
4-7
4.3.2 Auxiliary AC Power
AUX. RECEPTACLES
BREAKER
Auxiliary AC Power
will be available only
when the voltage
selector switch is
turned to 240/120V.
Auxiliary AC Power
will be available
independently of
the position of
voltage selector
switch.
GFCI RECEPTACLES
120V 20AMPS AUX.RECECTACLES
240/120V 50AMPS
＜ How to use GFCI Receptacles＞
It is available to get 1 phase/120V from
GFCI receptacles independently of the
position of voltage selector switch on the
control panel.
<Procedure>
① Start the generator unit and turn the main
breaker “ON” on the control panel.
② Turn the receptacle breaker of output
terminal “ON”.
＜ How to use aux. receptacles＞
Aux. receptacles are available only when the
voltage selector switch is turned to 240/120V
on the control panel.
<Procedure>
① Turn the voltage selector switch to
240/120V on the control panel when the
generator unit stops.
② Start the generator unit and turn the main
breaker “ON” on the control panel.
③ Turn the receptacle breaker of output
terminal “ON”.
H G
W
W
X
Y
120V
120V
240V
120V
A100414
A040270 A040271
GFCI RECEPTACLES
BREAKER