MMD Equipment 40S-8B1 - Manual (Page 7)

1.Safety
1-4
H990208
TR0304
H990432
1.2 Caution during Operation

Never touch the output terminals during operation.
 Notice that the voltage of several hundreds volt is applied to
the output terminal.

When removing or connecting a connecting cable for changing
load, be sure to switch OFF the circuit breaker, remove the
starter key from the starter switch, then carry out a work. The
operator must keep the key during operation.
Neglecting the cautions mentioned above, and a third
party starting the machine during operation may cause
serious accidents such as electric shock.

Keep hands off from the rotating portion or belts while running.
It could cause serious injuries if hands should be caught in.

Do not, under any circumstance, open the radiator cap while
running or immediately after stopping operation. Otherwise
high temperature steam jets out and this could cause
scalding.
Never touch the output terminals and interior of control board
Hands off from rotating parts and belts
Do not remove radiator cap during operation