MMD Equipment 400S-6B1 - Manual (Page 15)

3. Installation
3-1
3.1 Transporting Unit
Use the lifting bail“1”at the center of bonnet for hoisting up
and down the machine.
Since the rope hook is not strong enough to be used for
hoisting, never use it to prevent falling accident.
When transporting the machine, be sure to put it on the truck
bed and use the rope hooks to secure it with rope
Do not hoist up the machine while it is running. Otherwise, a
fatal trouble or serious accident may occur.
3.1.1 Lifting
Use the lifting bail“1”fitted on center of bonnet.
Select an appropriate crane or truck by referring to the
mass and dimensions mentioned in “Specifications”.
Only a qualified crane operator is allowed to operate a
crane.
3.1.2 Securing a machine on truck bed when transporting
When moving or transporting a machine from site,
place it on truck bed and fasten it by ropes“3”at two
hooks“2”on both right and left sides and moving
stop“4”on the common frame.
1
A080045
A080045
1
Transportation
2
3
4 3
A080047