MMD Equipment 150S-6A6 - Manual (Page 42)

5. Periodic Inspection/Maintenance
5-2
5.2 Daily Inspection and Keeping Operation Log
Be sure to carry out daily inspection every morning before operation. See Chapter 4 “OPERATION”
of the manual for the details of inspection.
Pay attention to and carefully observe the following points during daily operation or inspection and
maintenance work. If any trouble or abnormality is found, immediately investigate its cause and
make repairs. If the cause is unknown or not traceable, or if the trouble involves a part or
component not described in the manual, ask your nearest dealer for information.
(a) Controls and instruments function properly.
(b) Quantity and any leak of water, fuel, and oil or
any contamination should be checked.
(c) Appearance, abnormal noise or excessive heat
should be checked.
(d) Loose bolt or nut should be checked.
(e) Any damage, wear or shortage of machine
components and parts should be checked.
(f) Performance of each part or component should
be proper .
Keep the operation log to record constant inspection of each component, so that trouble of the unit
can be easily discovered and preventive measures can be taken.
It is very useful to record information such as frequency, temperature, current, maintenance items
and replenishment of lubricant on a daily maintenance log.
TR0049