MMD Equipment 150S-6A6 - Manual (Page 43)

5. Periodic Inspection/Maintenance
5-3
5.3 Periodic Inspection List
Such items marked
○
shall be carried out by customers.
For the following items or clauses marked ●, contact us directly or our distributors because they
require expert technical knowledge on them.
◎
Refer to engine operation manual for inspection and maintenance of an engine.
(Unit : Hour)
Maintenance Daily 50 250 500 1,000 Page Remarks
Check each instrument and
warning lamp.
○
4-12
Check insulation resistance.
○
5-6
Check GFCI receptacles. ○
( Every monthly )
5-7
Generator
How to check thermal relay. ○ 5-7
Check and Clean Clogging of Air
Filter Element.
○ 5-8
Change Air Filter Element ○ 5-13
Drain fuel tank. ○ 5-8
Check fuel level.
○
4-8
Check engine oil level. ○ 4-7
Check coolant level. ○ 4-7
Check looseness in pipe connector
terminals and tear in wiring.
○ 5-9
Check V-belt tension. ○ 4-8
In the case of NG, it
exchanges.
Change engine oil. ○
( First time )
○
5-5
Change engine oil filter. ○
( First time )
○ 5-6
Check fuel pre-filter drain
○
5-8
Check battery electrolyte. ○ 5-9
Check Specific gravity of battery
electrolyte.
○
5-9
Change fuel filter. ○ 5-9
Change fuel pre-filter
○
5-10
Check engine valve clearance. ●
Adjust fuel injection nozzle. ●
Check fuel injection timing. ●
Change coolant. ○
( Every 2 years )
5-11
Clean outside of Radiator and
Intercooler.
○
5-10
Dirt condition
cleans.
Check rubber hose. ○ 5-13
Eng
ine
Clean inside the radiator.
●