Montigo PVVEX58-300 - Manual (Page 16)

PVVEX58-300 & PVVEX510-300 Horizontal Power Vent
Page 16
XG0518 - 070714
Figure 6l.
Step 12: Using the ground screw, screw the capacitor bracket and
the ground wire to the motor.
Step 13: Strip the ends of all the wires. Using the large bell connec-
tor, connect the white fibre wire from the power cable to the black wire
from the motor and one of the black wires from the capacitor.
Figure 6m.
Step 14: Using a small bell connector, connect the black fibre wire
from the power cable to the blue wire of the motor.
Figure 6n.
Step 15: Using the other small bell connector, connect the other
black wire from the capacitor to the brown wire from the motor.
Figure 6o.
Step 16: Using a zap strap to bundle the wires neatly together.
Figure 6p.
Step 17: Using another zap strap, secure the bundle to the capacitor.
Figure 6q.
Service