Onwa Marine Electronics KP-823MKII - Manual (Page 13)

2.2.4. Single point navigation and cancel navigation
Single point navigation
Pressing the NAV key at any screen appears the navigation menu. Move the cur-
sor to the " " column and press ENT key to select the single point
navigation.If cursor navigation is required, move the cursor to "cursor navigation"
column and press the ENT key to select cursor navigation. See Figure 16.
Cancel navigation
Pressing the NAV key at any screen appears the navigation menu, select "Stop
Navigation" to cancel navigation operation.
Go To Point
2.2.5. Route setting and route navigation
New routes
1)Press the MENU key twice to enter the main menu, move the cursor to the
"Route" column and press the MENU key to enter the sub-menu, move the cursor
to "New Route" column and press the ENT key, displays the new route screen.
Press ENT and use Arrow keys to set the route name (numeric or alphanumeric),
press the ENT key to confirm the name, move the cursor to the "Waypoint" and
press the ENT key, use the cursor to select the desire waypoint and press
ENT to add it into the route, then press the MENU key to open the menu
window, move the cursor to "Edit on Map" column and press the ENT key, that
is, the establishment of new routes. See Figure 17
11
Figure 16 Figure 17