Onwa Marine Electronics KP-823MKII - Manual (Page 7)

Figure 1-1
1. Keypad instruction 1. Keypad instruction
5
Keypad instruction ( Figure 1-1)
MENU: Pressing it displays the menu of the current page,
pressing twice enters the main-menu.
: Enlarges the scale of the maps and charts,16 grades
totally. Display the listed items of the page by revers e-scrolling.
: Reduces the scale of the maps and charts,16 grades totally.
Displays the listed items of the page by scrolling.
NAV: MOB navigation, cursor navigation, achieve way-point
navigation, route navigation, return voyage.
:Turn the power on/off, adjust the back light brightness and
the volume, display the battery capacity.
ESC: Withdraw from the optional operation, or display the
previous page in reverse-cycle order.
ENT: Confirms the input or data.
Arrow: Move the cursor or select the number or letter.
MODE: Display the four main screens circularly, turn over the
listed interfaces.
MOB: The MOB mark denotes man overboard position.
The basic input principles for the equipment : Press MENU key to enter the menu
setting accordingly, then press the Arrow keys to move the cursor to select items,
press ENT to enter.
the required state. Press up/down Arrow keys to select the letter or number.
The number contains from 0 to 9, the letter contains from A to Z. Press left/right
Arrow keys to move the cursor.
During the input, press ESC key at any time to cancel the current operation and
return to the previous menu or operation; Press ENT key to confirm the current
input, and continue to enter the next operation or menu. In relation to the similar
operations, this manual will not repeat again.