Onwa Marine Electronics KP-823MKII - Manual (Page 21)

19
Barriers
Barrier there is barrier
New Barr
Barrier beside
show barriers on the chart
Set Up Map
Show Barrier Name
barrier
barrier
New WPT
Insert to Barri
View Barr
Enter the " " column, two ways to establish the point.
1) Press the MENU key to select " ", press ENT key to enter the
New window, move the cursor to the "symbol" option the "Name"
column, pressing ENT key appears 99 kinds of symbols (see Figure 28), press the
Arrow keys to move the blue box onto the symbol selected, and press ENT
key, move the cursor to the "Location", input the latitude and longitude, move the
cursor to "OK", press ENT key. If need to , press the
MODE key to enter the charts, pressing the MENU key appears the menu wi-
ndow, move the cursor to " " column, pressing the ENT key appears
the map setting window, move the cursor to " " column, press
ENT key , and then press the ESC key.
2) To establish points on the chart: press the Arrow keys to move the
cursor to the position of establishing the , pressing ENT key appears the
" " window, pressing the MENU key appears the menu window,
move the cursor to " " column (see Figure 29), pressing the ENT
key appears " " window, move the cursor to the "symbols" of the "Name"
column, pressing ENT key appears 99 kinds of symbols, and then press the
Arrow keys to move the blue box onto the symbol selected, and press ENT
key, move the cursor to the "OK" and press ENT key.
Enter the " " column, two ways to delete points.
1) pressing the MENU key appears the menu window, press the Arrow keys to
move the cursor to the "Delete" column or "Delete all" column, and then press the
ENT key.
2) To remove the points on the charts: move the cursor to the point
required to be removed on the chart, pressing ENT key appears the " "
window, move the cursor to the "Delete" and press ENT key.
Barrier there are barrier
barrier barrier
View Barr
Figure 28 Figure 29