Scotsman RS160 - Manual (Page 11)

Ice On Cold
Plate
Ice
Cut Away View
Ice Sweep
Rotor
Door
Upper Ice
Chute
Ice Chute
Cold Plate
HOW IT WORKS
The ice is stored in a hopper, and the hopper is
sloped towards the front of the dispenser. At the
front there is an angled rotor, when that rotor turns
it scoops ice up, lifts it to the top of the ice chute
and drops it through that chute into the user’s
container. At the base of the hopper is a cold plate (a block of
aluminum with several circuits of stainless steel
tubing molded within it). Ice in the hopper is in
contact with the cold plate and causes the
beverages within the tubing to become chilled.
The ice in direct contact with the cold plate is not
dispensed.
RS160 and RS220
June 1995
Page 11