Scotsman RS160 - Manual (Page 22)

MOVING
1. Sanitize syrup system as instructed on page 15.
2. Shut off water supply.
3. Unplug carbonator.
4. Remove connectors from syrup tanks.
5. Connect an empty syrup tank to one circuit.
6. Actuate valve on that circuit until only CO
2
(gas)
flows from it.
7. Repeat steps 5-6 for all valves.
8. Remove all ice
9. Drain all water from bin and drain circuit.
10. Remove all field connections from cold plate.
If the dispenser is going
to be moved to another
building, shipped any distance, or if there is any
possibility that it may be exposed to freezing
temperatures, it must be thoroughly cleaned of all
liquids to prevent damage.
RS160 and RS220
June 1995
Page 22