A technical specifications, English – Sim2 HT200 DMF User Manual
Page 21
21
ENGLISH
A TECHNICAL SPECIFICATIONS
Graphic standards :
VGA, SVGA, XGA, SXGA, UXGA
Deinterlacer:
Faroudja chip set, DCDi
™
, 3:2 pull
down sequence convertion
Colour temperature:
adjustable from 5000 to 9300
degrees K
Video processor:
DTI, CTI, comb filter, noise reduction.
Sharpness, Y/C delay and NTSC tint
adjustments
Remote control:
via infrared remote control and via
computer through RS232 serial
interface
Remote inputs:
via Remote Inputs Interface (optio-
nal) and cable with EVC connector
Low Voltage Power Output: two 12 Vdc output, 100 mA max on
jack connectors
GENERAL
Supply:
from 100 to 240 Vac, -10% +6%
tolerance
Frequency:
from 48 to 62 Hz
Consumption:
180 W max
Fuse:
T 3.15A H, 5 x 20 mm
Dimensions of projector:
352 mm x 174 mm x 318 mm (LxHxD)
13”-7/8 x 6”-7/8 x 12”-1/2 (LxHxD)
Weight of projector:
5.0 kg (11 lbs)
Packaging and
400 mm x 275 mm x 405 mm (LxHxD)
gross weight:
1’ 4” x 11” x 1’ 4” (LxHxD)
double reinforced carton;
expandable anti-shock packaging;
gross weight, including accessories:
8 kg (17.7 lbs); recyclable packaging
material
ENVIROMENTAL
Operation temperature:
0 to 35°C (32° to 95°F)
Transportation temp.:
-10 to 55°C (14° to 131°F)
Storage temperature:
-10 to 55°C (14° to 131°F)
Humidity:
10% to 90% relative humidity non-
condensing
Safety:
EN 60950, UL 60950
Transportability:
desktop equipment
Electromagnetic
EN 55022 Class B
compatibility:
EN 55024
EN 61000-3-2
EN 61000-3-3
Transportation:
IEC 68-2-31, IEC 68-2-32
Safety certification:
C
UL
US
OPTICAL
Projection system:
optical engine based on 1 DMD™
chip, sealed housing, dusty proof
DMD™ panel:
dual mode: 800 x 600 (4:3 mode)
848 x 480 (16:9 mode)
Brightness uniformity:
> 90%
Contrast ratio:
> 300:1 (checker board)
> 600:1 (full on / full off)
Projection lens:
zoom, 12 elements AR multilayer
coating, motorized focus and zoom,
manual elevation
Aperture f#:
2.7 (zoom max) - 3.3 (zoom min)
Picture size:
50-250 inches (diagonal measure)
Aspect ratio:
4/3 and 16/9
Throw ratio:
2.3:1 - 3.1:1 (4:3 Mode)
(throw distance: picture width)
2.2:1 - 3.3:1 (16:9 Mode)
Focus range:
2.2 - 13.0 m (7’ 3” - 42’ 8”)
Throw Distance:
Screen 4:3 (4:3 Mode)
60”
: 2.8m - 3.8m (9’ 2” - 12’ 6”)
80”
: 3.7m - 5.1m (12’ 3” - 16’ 8”)
100” : 4.6m - 6.3m (15’ 3” - 20’ 9”)
Screen 4:3 (16:9 Mode)
60”
: 2.6m - 3.6m (8’ 8” - 11’ 9”)
80”
: 3.5m - 4.8m (11’ 6” - 15’ 8”)
100” : 4.4m - 6.0m (14’ 4” - 19’ 7”)
Screen 16:9 (16:9 Mode)
60”
: 2.9m - 3.9m (9’ 5” - 12’ 10”)
80”
: 3.8m - 5.2m (12’ 6” - 17’ 1”)
100” : 4.8m - 6.5m (6’ 5” - 21’ 4”)
Keystone adjustement:
up to 28° (optical: +/-10° digital: +/-18°)
Lamp:
120 W UHP
Lamp life time:
6000 hours (average value meas-
ured in the laboratory under optimal
conditions; it can be sensibly re-
duced by the unit misusing)
ELECTRICAL
Input Signals:
CVBS on RCA/Phono type connector
S-VHS on Mini-DIN connector
RGBHV on DB15HD connector
RGBS / YCrCb on RCA/Phono type
connector
75 ohm Impedance
Horizontal frequency:
from 15 to 80 kHz (up to to UXGA
format @ 60 Hz)
Vertical frequency:
40-100 Hz
Video standards :
automatically selected (PAL B,G,H,
I, M,N,60, SECAM, NTSC 3.58, 4.43)
High definition video:
ATSC HDTV (480p, 720p, 1080i)