SONOSAX SX-62R Quick_Start - Manual (Page 12)

SONOSAX SX62R Quick Start Guide Page 12 of 34
4.4 OUTPUTS CONFIGURATIONS
From the main menu, enter the outputs configuration page by touching the [OUTPUTS] key; sub menus allow
configuration of the Main, Boom and Aux outputs of the SX62R.
[MIX] configure the main outputs on XLR3-M connectors [MIX-L & MIX-R]
[BOOM] configure the secondary monitor output on the XLR-6 connector [BOOM]
[AUX] configure the Subsidiary output on the TA-3 connector [AUX OUT]
4.4.1 MIX Output configuration
The electronic circuitries of Main output [MIX-L & MIX-R] can be turned ON or powered OFF to save on
battery.
The Master Limiters can be enabled or disabled, the Threshold level is factory adjusted at nominal output
level. Both Limiters can be Linked to keep the stereo image of the mix.
The stereo [RETURN] can be routed and added on the mix bus, offering two additional inputs at line level.
Power the main outputs On
or Off to save on batteries Assign the stereo Return to
the Mix Busses
Enable / Disable the
Limiters of the Masters Link Limiters of L & R mixes
Return to the Main Menu