SoundTraxx Tsunami Steam Technical Reference - Manual (Page 31)

Tsunami Technical Reference Page 29
CV 34
F0(r) Output Location
Description
Maps the F0(rev) function to any of eight DSD auxiliary function outputs as
defined by a 1 in the corresponding bit position:
Bit 0: HL, Head light output
0 = Output is unaffected by F0(rev).
1 = Output is activated when F0(rev) is on.
Bit 1: BL, Backup light output
0 = Output is unaffected by F0(rev).
1 = Output is activated when F0(rev) is on.
Bit 2: WH, Whistle Sound Effect
0 = Sound is unaffected by F0(rev).
1 = Sound is activated when F0(rev) is on.
Bit 3: BEL, Bell Sound Effect
0 = Sound is unaffected by F0(rev).
1 = Sound is activated when F0(rev) is on.
Bit 4: FX5, Effect 1 output
0 = Output is unaffected by F0(rev).
1 = Output is activated when F0(rev) is on.
Bit 5: FX6, Effect 2 output
0 = Output is unaffected by F0(rev).
1 = Output is activated when F0(rev) is on.
Bit 6: DYN, Dynamo Sound Effect
0 = Sound is unaffected by F0(rev).
1 = Sound is activated when F0(rev) is on.
Bit 7: SHW, Short Whistle Sound Effect
0 = Sound is unaffected by F0(rev).
1 = Sound is activated when F0(rev) is on.
Default Value: 66
Related CVs: See also CVs 33, 35-46
Function Output CVs
Bit 7
Steam:
Bit 0
SHW DYN FX6 FX5 BEL WH BL HL
Bit 7
Diesel:
Bit 0
SHH DB FX6 FX5 BEL HORN BL HL