SP Controls CatLinc - Manual (Page 10)

CONNECTING THE TRANSMITTER
(Figure 8 - Typical CatLinc VGA Connection)
CatLinc VGA
1) Connect the 15 pin HD D-sub connector labeled SOURCE on the
Transmitter to the VGA output port on the laptop or computer.
2) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
3) Mount the device anywhere with the Velcro strips provided.
4) Set your PC or laptop to export the VGA signal (settings vary - refer to
your PC documenation or Help for more information).
8