SP Controls CatLinc - Manual (Page 7)

CatLinc VID
The CatLinc VID allows composite video connection and unbalanced stereo
audio connection between two devices using CAT5, CAT5e, or CAT6 twisted
pair cable. The CatLinc VID supports NTSC, PAL, or SECAM video signals.
Connection is made to devices using 3 standard RCA connectors. No con-
figuration is necessary.
The CatLinc VID
can extend a com-
posite video signal
up to 365m/1200ft
over standard
CAT5. For shorter
distances
(110m/350ft or
less), system
power may be attached at either the Transmitter or Receiver. For distances
greater than 110m/350ft, the CatLinc Transmitter and Receiver must both
be powered. In this case, an additional power supply must be separately
ordered (part no. CatLinc PS).
CatLinc S-VID
The CatLinc S-VID allows S-Video (YC) connection between two devices
using CAT5, CAT5e, or CAT6 twisted pair cable. Connection is made to
devices using standard S-Video mini-DIN connectors. No configuration is
necessary.
The CatLinc S-VID can extend an S-Video signal up to 365m/1200ft over
standard CAT5. For shorter distances (110m/350ft or less), system power
may be attached at either the Transmitter or Receiver. For distances greater
than 110m/350ft, the CatLinc Transmitter and Receiver must both be pow-
ered. In this case, an additional power supply must be separately ordered
(part no. CatLinc PS).
CatLinc VID
5