SP Controls CatLinc - Manual (Page 11)

CONNECTING THE TRANSMITTER Cont.’d
CatLinc VGA-L
1) Connect the Transmitter 15-pin male HD D-sub connector with the COM-
PUTER icon to the VGA output port on the laptop or computer.
2) Attach the 15-pin female HD D-sub connector with the MONITOR icon on
the Transmitter to a VGA cable, or terminate with a male 75 ohm VGA plug
(the loopback must be terminated). Connect the other end of the VGA cable
to the VGA input of your local monitor.
3) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
4) Mount the device anywhere with the Velcro strips provided.
5) Set your PC or laptop to export the VGA signal (settings vary - refer to
your PC documenation or Help for more information).
CatLinc VID
1) Connect the yellow RCA connector labeled VIDEO on the Transmitter to
the RCA video output port on the VCR or video device.
2) Connect stereo audio from the source device to the red (right channel)
and white (left channel) RCA’s labeled AUDIO on the transmitter.
3) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
4) Mount the device anywhere with the Velcro strips provided.
CatLinc S-VID
1) Connect the mini-DIN connector labeled SOURCE on the Transmitter to
the S-Video mini-DIN output port on the DVD Player or video source.
2) Attach one end of the CAT5 cable into the RJ-45 jack labeled CAT5 on
the Transmitter.
3) Mount the device anywhere with the Velcro strips provided.
9