Super Systems DAQ - Manual (Page 34)

Super Systems Inc. Page 34 of 34 DAQ Operations Manual
Revision History
Rev. Description Date MCO #
- Initial Release 7/29/2008 N/A
A Changed picture formatting to allow text to wrap
around; Added “Aux Instruments”,
“Communication Setup”, “Device Configuration”,
“Aux Instrument Setup” Configurator menus;
Modified “Range Setups” Configurator menu;
Added sample curve in “Custom Curves” section;
Added serial communications setup instructions
12/4/2008 2071
B Changed manual to new format.
Changed manual to reflect ability to use 6-pin
connection to RS232 port. This includes the
instrument picture as well as the wiring diagram.
Added new figure for Range Setups > Select New
Value.
Added Modbus register locations for SuperDATA
(SDIO) communications.
05/03/2013 2121